GRAFFITI REMOVER GALLON

SKU: 78024
Categories: PAINT SUNDRIES, SOLVENTS, PAINT REMOVERS
What you pay: $96.5 each
Quantity Discounts:
  • 12-23 - $91.68 each
  • 24-48 - $86.85 each
  • Call for larger opportunity discounts

Product Use (Standard)

  • BBSM is applied to the surface with a nylon brush, broom or pump-up sprayer, 3 times at 3 minute intervals, liberally flooding the graffiti with the product.
  • For typical graffiti, approximately three minutes after the final application, pressure washer (hot water is best).
  • If one is not available then a stiff, nylon brush and bucket of water may suffice
  • Agitation, as you apply this product, can be of great assistance.
  • Continued experience with the product will enable the user to judge how many applications are necessary for varying surfaces and particular spray cans.
  • On older/thicker graffiti, patience is the key.
  • Keep the graffiti wet with the product, as long as possible before rinsing.

Product Use (Pressure Washer)

  • Remember, a pressure washer in this instance is used as a quick release rinse of the dissolved graffiti, and not the primary means of cleaning.
  • Ideally use 1500 – 2000 psi with a 15º or 25º fan jet at about 6 inches from the surface.
  • When rinsing dissolved graffiti with a pressure washer try to remove a LITTLE of the graffiti from the bottom of the tag without wetting the whole area.
  • If satisfied, then proceed to full scale.
  • Wash the whole area from top to bottom.
  • Remember if the remover has not done its job then no amount of ‘blasting’ will fix the problem.
  • Failures are usually a result of not flood coating adequately and not leaving product on long enough and cannot be resolved by blasting too close or at higher pressures.
  • Do not use ‘turbo’ type nozzles, or blast too close, as you may cause damage and will possibly only remove a small percentage more.

Coverage Guidelines (1 Gallon)

  • 200 sq ft of typical graffiti on concrete, brick, block or masonry surfaces.
  • 80 sq ft on sandstone, limestone and other soft absorbent surfaces (per 3 flood coat application).
  • Up to 1000 sq ft per gallon on painted/coated surfaces.
  • Exact coverage varies depending on type of stain and the porosity of surface material.

Sizes Available

  • 20 oz. can – WB0015
  • 1 Quart – WB0012
  • 1 Gallon – WB0010
  • 5 Gallon – WB0011
Questions?
Speak with a real person who will go out of their way to help!
Phone: 1 800 494 4794
Open Now: 12:00pm-11:45pm EDT

Additional information

Weight 10.0500 lbs
Dimensions 12.00000 × 6.00000 × 8.00000 m
Vendor

Reviews

There are no reviews yet.

Be the first to review “GRAFFITI REMOVER GALLON”

Your email address will not be published. Required fields are marked *