NSS BP RANGER 1250S WET/DRY

Features

• Access to the powerhead for routine maintenance is attained by removing four bolts.
• High air intake; float shut-off activates long before any moisture reaches the vacuum fans.
• The cone surrounding the float shut-off combines with the round tank to cause “cyclonic action,” forcing liquid and debris to the bottom of the recovery tank rather than through the vacuum motor fans.
• The float shut-off, made of corrosion-resistant materials, will not fail to operate due to waterlogging.
• The all-polyethylene construction of the powerhead resists dents and corrosion; poly parts are warranted for 10 years.
• Exclusive NSS[R] vacuum motor produces fast and thorough recovery.

The motor makes a difference. Powerful performance and longevity are the heart and soul of the BP-Ranger. Here’s a list of reasons the BP-Ranger regularly outdistances all other wet/dry vacuums.

• 1) Top Bearing. Double-sealed, this bearing keeps out dirt and moisture, the main causes of motor failure.
• 2) Commutator. The copper thickness in this component is almost twice that of standard commutators.
• 3) Carbon Brush. Easily accessible, the carbon brushes are rated for a minimum of 2000 service hours.
• 4 and 5) Armature and Field. The armature and field are built to facilitate balance between the motor and fan. This produces a smoother running machine.
• 6) Armature Shaft. Shortened to lower motor torque, this component also helps maintain better fan balance.
• 7) Cooling Fan. Mounted to the bottom of the motor compartment, this fan directs a cooling air stream over the bearings, commutator and the field.
• 8) Cooling Air Vents. Air used to cool the motor components is exhausted through these vents.
• 9) Suction Air Vents. Vacuum air, drawing dirt into the tank, is exhausted through these vents.
• 10) Bearing and Housing. The double-sealed bottom bearing is protected by a steel housing.
• 11) Suction Fans. This series of 7″ fans produce the powerful suction utilized by the BP-Ranger.
• 12) Fan Housing and Cover. To protect against rust and corrosion, the fan housing and cover are made of stamped aluminum.

Specifications

• CFM/Water Lift: Closed: 0 cfm, 76″ waterlift; .75″: 54.3 cfm, 50″ waterlift; 1″: 84.8 cfm, 39″ waterlift; 1.25″: 111 cfm, 28″ waterlift; 1.5″: 130 cfm, 18″ waterlift; 2″: 146 cfm, 7.5″ waterlift.
• Front Squeegee: 27″ toe-operated
• Tank Construction: 304 stainless steel
• Filter: Area: 625″[2]; Material: Cotton supported by aluminum ring
• Sound Level: 63 dbA @ operator
• Cord: 50 ft. 16-3 SJT
• Base: Tip-dispose, polyethylene
• Weight: 74 lbs.
• Warranty: 7 year limited, 10 year poly parts